Specifications include, but are not limited to: 1. Engine: CUMMINS ISB220 DIESEL, in-line six cylinder, Max Speed set at 65 MPH. 2. Transmission: Allison 2500PTS 6-Speed automatic with Synthetic fluid included 3. Front axle: 10,000 lbs. minimum capacity. Kingpins must be serviceable and replaceable as a separate component of the axle 4. Rear axle: 23,000 lbs. minimum capacity, with dual air ride suspension 5. Tires: 255/70R/22.5 (G) Goodyear Radial tubeless highway treads with front/rear mud flaps 6. Wheels: 8.25”x22.5”, 5 hand, 10-hole disc, w/ baked on black powder coat 7. Brake system: Full air brake system with Wabco (or equivalent) anti-lock feature & Bendix AD/9 air dryer with heater 8. Driveline: Must include a booted slip yoke or a 5 year 100,000-mile warranty 9. Front brakes: 15.0” x 5.0” / .85” thick-long life linings or largest size available 10. Rear brakes: 16.5” x 7.0” / .85” thick-long life linings or largest size available 11. Steering Column: Tilt and telescoping 12. Engine Brake: Include integral exhaust brake system 13. Alternator: Pad Mounted Leece-Neville 270-amp high output at low rpm, minimum 14. Batteries: Three (3) 12-volt, 2280 CCA’s minimum Alliance 1031 Group 31 Batteries. Include Master disconnect switch mounted to battery box 15. Battery Tray: Frame mounted battery box. Batteries shall be mounted on a sliding tray with stainless steel roller bearings 16. Fenderettes: Provide steel wheel well fenderettes on the rear wheel well openings 17. Starter: Delco 12v 41MT 400 series or equivalent 18. Fuel Tank: Between the rail (BTR) 100 gallon minimum capacity 19. Frame Rails: Custom punched / Powder coated 120,000 PSI frame rails 20. Gauges: Include transmission temp & amp gauge