Specifications include, but are not limited to: 1. Boundary Lines, Giving Length and Bearing on Each Straight Line; Interior Angles; Radius, Point of Tangency, And Length of Curved Lines. Set Iron Pin (Monument At Property Corners Where None Exists; Drive Pin 18” Into Ground, Mark With Wood Stake; State On Drawing Whether Corners Were Found Or Set And Describe Each. 2. Legal Description, Including Measurements In Recorded Deeds For Comparison With Observed. 3. Area In Square Feet If Less Than One Acre, In Acres (To .001 Acre) If Over One Acre. 4. Identify, Jurisdiction And Width Of Adjoining Street And Highways, Width And How Paved. Identity of Landmarks. 5. Plotted Location of Structures on the Property and on Adjacent Property within 30 Feet. Dimension Perimeters in Feet and Inches to Nearest ½. State Character and Number of Stories. Dimension to Property Lines and Other Buildings. Vacant Parcels Shall Be Noted “Vacant”. 6. Encroachments, Including Cornices, Belt Courses, Etc., Either Way Across Property Lines. 7. Fences And Walls; Describe. Identify Party Walls and Locate With Respect To Property Lines. 8. Recorded Or Otherwise Known Easements And Right-Of-Way; State Owner Of Right. 9. Possibilities of Prescriptive Right-Of-Way and Nature of Each.