Specifications include, but are not limited to: Replace existing 250 KW generator and fuel tank with new genset equivalent to existing generator. 1. Perform all work in accordance with all applicable national and local codes and code authorities. 2. Submit electronic copy of shop drawings for all material furnished under this division of work. 3. Secure and pay for all necessary permits, licenses and inspections required by law for the completion of the work. Secure and pay for all certificates of approval that are required and deliver them to the engineer before final acceptance of the work. 4. Make excavations to the proper depth, with allowances made for floor slabs, forms, beams, etc. Compact the ground under conduits before conduits are installed. 5. Identify electrical equipment using laminated three-ply, engraved, plastic nameplates as required with black surface and white interior core, at least 1/16 inch thick. Attach nameplates using chromium plated screws as required. Provide nameplates for new disconnect switches.