Specifications include, but are not limited to: Asphalt: All asphalt surface work to include base work by milling (pulverizing) existing asphalt/base and blending with cement to a rate of 4.5 lbs. for parking lots and 5.61 lbs. for streets per square foot to a nine-inch (9”) depth. Compact to 95% standard density, remove excess material for minimum seven-inch (7”) base thickness. Pave with type “D” hot mix asphaltic concrete (HMAC) surface course to achieve a compacted minimum two-inch (2”) thickness. 5.4.1.1 New Construction of Parking Lots or Streets: Project plans shall dictate one of the following: 1. To be milled to nine inches (9”) – twelve inches (12”) (per project drawings) depth, add 40 lbs. Portland cement per square yard and overlay with two inches (2”) type B and two inches (2”) type D asphalt OR 2. To be milled to nine inches (9”) – twelve inches (12”) (per project drawings) depth, add 40 lbs. Portland cement per square yard and overlay with two inches (2”) type B and three inches (3”) type D asphalt.