Specifications include, but are not limited to: The Contractor will provide chemical analysis for the Water Utilities Lab, Wastewater Analysis division and Pretreatment Analysis Division for the Utilities Departments on an as needed basis. 4.1 General Requirements A. The Contractor shall provide chemical analysis for Water Utilities Lab, Wastewater division and Pretreatment division. Contractor shall perform chemical analysis as per the requirements outlined in Exhibits A to C. B. The Contractor shall conduct tests as per 40 Code of Federal Regulations(CFR) 136 – Water Methods. C. The Contractor shall responsible for providing labor, technician, equipment and transportation for these services. D. The Laboratory shall be accredited by TNI (NELAP). The City reserves the right to inspect the facility before start of the contract or any time after the contract. 4.2 Types of Chemical Analysis A. Water Utilities Lab - Exhibit A 1. Mineral set Analysis 2. Metals Analysis 3. Storm water runoff Analysis 4. Trihalomethanes (TTHMs Analysis B. Wastewater Division - Exhibit B 1. Metals C. Pretreatment Division – Exhibit C 1. 1st thru 4th Quarter Sampling 2. 1st Quarter Sampling 3. 3rd Quarter Sampling 4. Biosolids Testing 4.3 Sample Bottles and Shipment A. The Contractor must provide pre-labeled containers with preservative (where applicable) and ice chest/coolers for sample collection. The Chain of Custody use shall be provided by the Contractor. Actual data used to calculate Precision and Accuracy must be provided on the final report. The Minimum Analytical Levels (MAL/RL) must be achieved unless it is otherwise specified. B. The Contractor shall be responsible for picking up and drop off samples/container from the Lab. The Contractor shall arrange a schedule for pickup and drop off with the Contract Administrator.