Specifications include, but are not limited to: A. Overall system should be “turn-key” – no additional hardware / software modifications or customization needed. B. Overall system should have physical footprint compatible with leading bus manufacturers such as Thomas, BlueBird, International, etc. C. Overall system to capture interior and exterior video when vehicle is running, and turn off 10 minutes after the engine has been shut off. D. Overall system should be capable of imprinting video with timestamp (date, time) and GPS location to document the vehicle location at the date/time shown on the video. E. System should provide historical GPS information of each vehicle. F. Onboard system to be fully contained in a tamperproof enclosure and securely installed to prevent unauthorized access, yet easily accessible for service and video retrieval. G. All cameras to have a minimum resolution of 720p. H. Cameras and microphones to capture audio and video for following locations on each bus: a. Interior looking out the windshield* b. Interior looking down at the bus driver and stairwell* c. Interior looking back towards the back of the bus* d. Interior halfway looking back towards the back of the bus* e. Rearview f. Exterior down the right of the bus *Indicates microphone location I. Designated Interior Cameras to have built-in omnidirectional microphones.