Specifications include, but are not limited to: 1. The Contractor shall design, produce and install the specified graphics on SUV-type vehicles and various pickup trucks for the City of Beaumont. 2. GRAPHICS A. Chevrolet Tahoes, Ford Explorers, or similar SUVs shall include: 2.1 White full door wraps for driver and passenger side front and rear doors 2.2 Small graphics, both rear quarters 2.3 Graphics for liftgate B. Pickup Trucks shall include: 2.4 City Logo on both front doors 2.5 Department ID below logos 2.6 Unit ID number on tailgate and both doors 3. Brand names and/or manufacturer's stock numbers are given for purposes of identification and to denote the standard of quality desired and do not restrict bidders to a specific make or manufacturer. Materials bid as “equal” must meet or exceed these standards. Final decision as to acceptance shall rest with City personnel. 4. Door wrap shall be Oracal 970RA gloss white. Door wrap to be installed per manufacturer’s specifications, including heating to conform to door handle recess contour. General appearance of design requested as shown in Exhibit A. 5. Rear quarter and tailgate graphics shall consist of four (4) digit unit numbers, three inches (3”) in height. Unit numbers to be white in color, or black for white vehicles. Rear quarter (side) unit numbers have a forward slant as shown in Exhibit B. 6. All graphics to include full reflective stripes and lettering. Reflective graphics to be digitally printed with solvent inks onto Oracal 5650 white reflective and laminated with Oracal 751 clear for UV stabilization and scratch resistance. THERE WILL BE NO OVERLAYS PERMITTED UNLESS PRIOR APPROVAL FROM FLEET MANAGER, AND THIS WILL BE AT A MINIMUM. Graphics should be one continuous, all-inclusive print, that includes all colors, images, lettering, numbers, badges, etc. Breaks due to length is permitted