Specifications include, but are not limited to: The Contractor shall: 5.1. Services shall meet or exceed the following specifications: 5.1.1. Contractor shall remove two (2) existing entry/exit doors 7’ height x 36” wide and a 6’ height x 3’ wide transom panel, along with the exit signage and hardware and materials. (See Attachment #1 -for Picture of Doors and Transom Panel Needing Replaced). 5.1.2. Contractor shall leave on site the exit signage after removed. 5.1.3. Contractor shall remove entry/exit doors and the transom panel and all materials and hardware off site after removed for disposal. 5.1.4. Contractor shall install new metal header jamb in door frame. 5.1.5. Contractor shall install a new 6’ height x 3’ wide transom panel with new plate safety glass (fixed in place). 5.1.6. Contractor shall install two (2) new 7’ height x 36” wide commercial grade extra heavy exterior hollow core steel doors in jamb that conforms to local building codes and fire code regulations; sound attenuation and insulation requirements. 5.1.7. Contractor shall install two (2) new 6” x 27” narrow safety light / safety glass kits (one in each door). 5.1.8. Contractor shall install a new ADA threshold. 5.1.9. Contractor shall install two (2) new stainless-steel door closure handles (one on each door). 5.1.10.Contractor shall install two (2) new stainless-steel interior kick panels (one on each door). 5.1.11.Contractor shall install new two-piece Astragal around the doors. 5.1.12.Contractor shall install new door sweeps sealing and weatherproofing the door crevices. 5.1.13.Contractor shall install 4” x 16” push plates on the inside of doors and 4” x 16” pull plates on the outside. 5.1.14.Contractor shall install two (2) hydraulic door closures. 5.1.15.Contractor shall reinstall removed exit signage.