Specifications include, but are not limited to: 1) Preconstruction Services: The CM@R will work with the Architect and review construction documents at 30%, 60% and 95% levels of completion to ensure the feasibility and constructability of the Architect’s design, and that the cost of construction of the Project is within the estimated Construction Budget through value engineering, the selection of construction systems and materials, cost estimating, scheduling, and other means. The CM@R will also review the project schedule and identify critical path and long lead items. Upon the completion or during the process of such services, the CM@R will submit a proposal of a Guaranteed Maximum Price for the construction of the Project, which is within the City’s Construction Budget currently established at $10,000,000.00. 2) Bidding Services: Should the City exercise its option; the CM@R will serve as General Contractor to complete all work for the bidding and construction of the project. The CM@R will be responsible for coordination of all bid, advertisement and solicitation, bid procurement, selection of sub-consultants or trade contractors. CM@R will also be responsible for issuance of pre-purchase orders for long lead items, if required. 3) Construction Services: Should the City exercise its option; the CM@R will serve as General Contractor to complete all work for the construction of the Project. The scope of Construction services will be determined based on the final Drawings and Specifications but may consist of one or more of the following areas of work: site clearing, excavation, fill, select fill and backfill; site utilities; concrete sidewalks, paving and roadway/parking lot work, rough and finish grading, topsoil and grass planting; fencing and gates, site lighting, retaining wall construction, landscape installation, irrigation, concrete piers, structural concrete; concrete slab-on-grade, concrete masonry unit (CMU) interior and exterior walls, cast stone lintels, limestone and plaster exterior veneer, concrete floor topping, masonry, structural steel frame (columns and joists), metal roof deck, metal wall and roof panels, miscellaneous metals and metal fabrications; rough and finish carpentry, millwork and casework; damp proofing and waterproofing, caulking and sealants, thermal insulation, flashing and sheet metal, metal soffit panels, metal roofing, modified bitumen roofing; other roofing, wood doors, metal doors and frames, aluminum doors and frames, glass and glazing, finish architectural hardware, acoustical ceilings, resilient flooring and base, carpeting, tile or wood flooring, metal studs and support systems, gypsum drywall, painting and special floor coatings, interior and exterior signage; metal louvers and miscellaneous specialties; furnishings and appliances; equipment and specialty equipment; sound enhancement systems; fire protection; lightning protection; telecommunications, audio/visual and security systems and mechanical, plumbing and electrical systems, and any other requirements set out in the Contract Documents.
