Specifications include, but are not limited to: 8’ Front Mounted Snow Plow (Item ID 1000176369) Moldboard The blade shall be 8’ wide and is a full moldboard trip blade design. Blade moldboard shall be constructed from a minimum 11 gauge steel and includes standard cast iron wear shoes. Cutting edge shall be Kuper GK-5 rubber edge with ceramic inserts or Joma 6000 Blade shall be 29” high with 7 vertical and 2 diagonal ribs. Blade measures 83” wide when angled at 30° and 96” when in the straight position. ; he plow shall have a hydraulically assisted attaching mechanism with an electrical toggle switch mounted on the headgear. The connecting pin spring levers can be properly positioned and shall engage automatically when toggle switch is energized, and headgear is raised by use of the hydraulic lift cylinder and hydraulic power unit. ; Electrical system shall have two connectors at the vehicle grille. Control harness shall have complete compatibility to operate either straight plows or Vee plows with no modifications to harness. Electrical power for plow shall come directly from vehicle battery and shall have no effect on other vehicle systems. Plow control options shall include a push button type handheld control or a joystick type control. ; The complete hydraulic system shall be contained inside an enclosure protecting it from corrosive elements and hydraulic freeze-up. The two part system shall consist of an electric hydraulic power unit operating at 2500PSI and a separate electrically activated hydraulic valve block. The atmospheric breather for the system shall be enclosed from the elements to avoid water ingression each time the system is activated. ; 9’ Front Mounted Snow Plow (Item ID 1000176370 ; 10’ Front Mounted Snow Plow (Item ID 1000176371) ; 12’ Front Mounted Snow Plow (Item ID: 1000114263) ; 14’ Front Mounted Snow Plow (Item ID: 1000114259).