Specifications include, but are not limited to: Grease Interceptors Specifications Expose and demolish the existing grease interceptors. Remove the existing sidewalk were necessary to remove the existing tanks. Install gravel to bed the new ditch as required per the specs of the tank manufacturer. Using a crane , lift the tanks from the loading dock area outside the kitchen and swing them over the building and other obstructions to set the tanks into the prepared hole. The grease interceptor will be connected in series as required by Nashville Metro codes. After the tanks are installed and connected inspection from Nashville Metro Codes will be required. Once inspection is completed, the tanks will need to be backfilled using gravel as required per the specs of the manufacturer.