Loading...
Skip to main content
< Back to results

Classroom Furniture


Location
Tennessee
Publication Date
02/06/2019 07:30 AM EST
Closing Date
02/19/2019 03:00 PM EST
Issuing Organization
Rutherford County School District
Solicitation Number
Description

Specifications include, but are not limited to: 1. Stack Chair – 13 1/2” - The frame shall be formed from a minimum of 16-gauge tubular steel with a crossover design for minimum stress on welded area. All welds to be made of mig method. Solid plastic seat and back double contoured with a large waterfall front edge for comfort. Seat and back to be thermal setting solid plastic made of flour and melamine resin with binder component to assure a hard-smooth surface. Must be a minimum of 3/8” thickness for easy handling and stacking a minimum of five (5) high within 50” high area. Lower frame structure shall be a cross-over form by each leg component running continuous and diagonal across to form an x-braced construction as found in the Scholar Craft series #180 or the legs shall be secured below the seat by an x-braced attached to each leg approximately midway between seat and floor as featured in Virco’s #3000 series. School board determines glide base between: felt-base or nylon-base. Mfg: Scholar Craft #152 series; Virco #3014; Columbia 152 series; or approved equal. 2. Stack Chair – 15 1/2” - The frame shall be formed from a minimum of 16-gauge tubular steel with a crossover design for minimum stress on welded area. All welds to be made of mig method. Solid plastic seat and back double contoured with a large waterfall front edge for comfort. Seat and back to be thermal setting solid plastic made of flour and melamine resin with binder component to assure a hard-smooth surface. Must be a minimum of 3/8” thickness for easy handling and stacking a minimum of five (5) high within 50” high area. Lower frame structure shall be a cross-over form by each leg component running continuous and diagonal across to form an x-braced construction as found in the Scholar Craft series #180 or the legs shall be secured below the seat by an x-braced attached to each leg approximately midway between seat and floor as featured in Virco’s #3000 series. School board determines glide base between: felt-base or nylon-base. Mfg: Scholar Craft #155 series; Virco #3016; Columbia 152 series or approved equal.

Source
http://www.rcschools.net/apps/pages/index.jsp?uREC_ID=524085&type=d&pREC_ID=1040029 (opens in a new window)

Get instant access

to solicitation details & future business opportunities.

Get Access

Vendor packages with access to similar open solicitations

Statewide

Matching bid notifications & access to all Statewide & Group bid details

Group

Matching bid notifications from participating agencies

Basic

Access participating agency bids