Specifications include, but are not limited to: GENERAL Refuse body will have a capacity of 31 cubic yards _____ _____ ______ Packer body capable of packing 950 pounds per cubic yard of dry household trash _____ _____ ______ Hopper shall have a minimum capacity of 6 cubic yards _____ _____ ______ Packer must meet all applicable standards _____ _____ ______ BODY CONSTRUCTION (minimums) Body shall be all welded construction _____ _____ ______ Body wall thickness is 10 gauge steel, Hardox 450, 174,000 psi strength _____ _____ ______ Body roof thickness is 10 gauge steel, 80,000 psi _____ _____ ______ Body floor is 7 gauge steel, AR 235, 70,000 psi Sides, front and rear to be reinforced for strength requirements _____ _____ ______ Reinforcement design and characteristics dependent upon construction methods used, but they must be certified to meet the specified compacting requirements without body distortion _____ _____ ______ Shall provide a shovel holder _____ _____ ______ Shall provide a cleanout tool and dual cleanout doors with a dimension of 12” x 16” each _____ _____ ______ BODY DIMENSIONS Body height above truck frame shall not to exceed 108” _____ _____ ______ Outside width of the body is not to exceed 96” _____ _____ ______ ________