Specifications include, but are not limited to: a) Internal chamber dimensions of 20” x 20” x 38”. b) A double door design, with manual hinged radial arm doors. c) A piping serviceable area must be included on the right side due to the configuration of the room and space of the lab. d) An Integral Carbon Steel Electric Generator (30 kilowatt) steam supply. e) Feature racks manufactured of 316L Stainless Steel. f) Air, steam, water, and drain utility connections from building termination to the equipment (maximum six (6) feet) using flexible or hard piping in accordance with Davidson county building regulations g) Feature piping to be threaded brass, copper, or stainless steel. h) Equipment components must be constructed of the following material: i) Brass; or ii) Stainless Steel. i) All valves are air operated, not electro-magnetic. (For improved reliability and lower maintenance cost). j) A water ejector vacuum system. k) An Effluent Sterilization Bio-Filter System with Sterilize-in-Place bio-filter. l) A minimum of 316L stainless steel chamber. m) A minimum of 304L stainless steel full jacket. ; Equipment must feature the following available cycles: a) Pre-Vac, b) Gravity, c) Liquids 5) Equipment must feature the following test cyclesto verify integrity of chamber, piping and valves: a) Vacuum leak Test b) Bowie-Dick Test.