Specifications include, but are not limited to: Godwin Pump, Dri-Prime (continuously operated venturi air ejector priming device) HL-130M, with stainless steel construction option to meet the specifications below or equal; mounted on a GL14 Drop In Trailer with 4-wheel electric brakes, DOT lighting package, tandem axles, and 14,000 lb. GVW to safely support and transport the required pump or equal. Pump specifications include: CD4MCu stainless steel wetted parts/materials construction, 6-inch 150# ANSI B16.5 Flange Suction x 4-inch 300# ANSI B16.5 Flange, Caterpillar C9.3 FT4 Diesel Engine, 300 HP @2100 rpm, with Prime-Guard Engine Controller. Pumping rates up to 1500 gpm and the capability of discharge pressures up to 273 psi. Able to automatically prime to 28-feet of suction lift from dry. Able to pump 462 U.S. gallons per minute to a total delivery head of 598 feet from 25 feet of total suction head. Dry running high pressure liquid bath mechanical seals with high abrasion resistant silicon carbide faces, Viton elastomers, and stainless steel body. Maximum suction pressure 87 psi. Impeller diameter 20.2 inches. Maximum casing pressure 410 psi. Maximum operating speed 2100 rpm. Maximum solids handling of 0.9 inches. Maximum operating temperature of 176 degrees Fahrenheit. Minimum fuel tank capacity of 200 gallons. Dimensions: (L) 152 inches x (W) 60 inches x (H) 97 inches. Dry weight 9,050 lbs. Maximum fuel consumption @ 2100 rpm: 15.5 U.S. gallons per hour.