Specifications include, but are not limited to: 1. Dimensions: 12’ long, 30” wide, 29” high (bench height is less 12” from height of table) ___ ___ 2. High pressure melamine plastic top. ___ ___ 3. Vinyl sheet applied to underside of tabletop. ___ ___ 4. Table top edges un-banded & sealed with urethane, bonded to core w/ 5/8” edge radius, 1 ½”corner radius for durability and top plastic protection, moisture control & sanitation ___ ___ 5. Table top core ¾” medium density fiberboard ___ ___ 6. Top riveted to frame ___ ___ 7. Welded table top frame of 14 gauge structural steel w/1 7/8” deep channel (one piece), fully operable with or without top and legs operable from top frame ___ ___ 8. Vertical center hinge 7-gauge structural steel w/ ½” dia. steel/chrome lockbar. ___ ___ 9. Pivot points minimum 3/8” dia. steel bolts w/ locknuts ___ ___ 10. Table folds easily, assisted by steel torsion bars ___ ___ 11. Tables shall fold in one easy operation, assisted By Mechanical Strut Lift Assist System. Strut Shall be all steel construction, completely selfContained, internally permanently lubricated With food grade lubrication