Specifications include, but are not limited to: 2.2.1 The emulsion/dispersion polymer must remain in light mineral oil with low viscosity in the neat or undiluted form and have at least 39% active solids. The dry polymer must have at least 95% active solids and be free of moisture (when the dry polymer(s) are delivered), debris and other contaminants. 2.2.2 Vendor must propose restriction free ordering (no minimum and no maximum) order quantities. 2.2.3 Viscosity - Products must be compatible with existing polymer system, when made to recommended concentrations. 2.2.4 Temperature - Product's effectiveness shall not be altered significantly due to temperatures. Supplier will provide recommendations for storing products to prevent temperature issues.