Specifications include, but are not limited to: WHEEL TYPE, TWO-DISK HYDRAULIC FIRELINE PLOW FOR 102HP CRAWLERS FESCO MODEL P-3-HJR OR EQUIVALENT PLOW LENGTH: 117” or 9’9” Overall. PLOW LENGTH: From center of pull pin to center of wheels 4’10”. PLOW WIDTH: 69” – 72” overall wing to wing. PLOW FRAME: 4” x 6” x 3/8” tubing. PLOW CROSSMEMBERS: 4” x 6” x 3/8” tubing 42” maximum long axle sockets 4” x E.H. pipe 18” long. Grease fitting installed to lubricate tubing. PLOW AXLE: 50” long x 3-1/2” round C-1141 alloy steel with spindle welded at 90-degree angle to axle. PLOW DRAWERBAR COUPLING: Swivel type P-74, 4-position adjustable. PLOW DRAWBAR: Four (4) position adjustable tongue. The adjustable plow hitch must be designed to accommodate drawbar height of tractors for a range of 17” to 20” (ground level to drawbar on tractor) for plow to be level. PLOW DISC: 26” diam., 3/8” thick, 4" concavity high grade heat treated steel.