Specifications include, but are not limited to: Installation of Stop Logs Furnish a 200 ton crane with at least a 250 foot reach including any supplies and materials. 2 freight trucks with qualified drivers. Freight trucks must be a truck with a pull behind trailer, 47 feet in length or longer, able to carry 60,000 lbs. Provide a Rigger foreman & labor personnel. Move stop logs from the lay down site located at US Army Corps Of Engineers and transport them to the St. St Stephen Fish Lift Remove walk way over slots where the stop logs are going Install 6 stop logs into 2 separate slots. Stop Logs weight (5 tons each) Removal of Stop Logs Furnish a 200 ton crane with at least a 250 foot reach including any supplies and materials. 2 freight trucks with qualified drivers. Freight trucks must be a truck with a pull behind trailer, 47 feet in length or longer, able to carry 60,000 lbs. Provide a Rigger foreman & labor personnel. Remove stop logs from the slots at the St Stephen fish lift Replace the walk way over the slots Transport stop logs from the fish lift to the lay down sit located at the US Army Corps of Engineers.