Specifications include, but are not limited to: Installation to be completed by Hobart Install Team, and will include installation of the new dish machine, removal/disposal of the old unit, stainless steel modifications on the unload side, and electrical/power changes to accommodate the new dish machine. Once the new unit is installed, it will be thoroughly demonstrated to the kitchen staff. Hobart model AM15VLT (tall) dish machine Internal condensing system minimizes water vapor Does not require a vent hood Dishmachine to be NSF certified for both dishwashing and utensil washing Chamber height 27” for 18”x 26” sheet pans or 60 quart mixing bowl Capable of 40 racks per hour as hot water sanitizing unit .74 gallons of water per rack Cycle to be fully automatic including actuation by door closing Voltage and phase of the AM Select to be 208-240/60/3 Unit to be field convertible from straight through to corner installation without tools Will need two sheet pan racks for six (6) 18”x 26” sheet pans each Construction Full access provided to interior through three-sided wrap chamber design constructed of 16 gauge stainless steel Tank and tank shelf to be drawn with rounded corners for easy cleaning and self flushing. Tank bottom to be contoured and sloped to drain for complete draining Full enclosed base with stainless steel panels removable with tools Stationary top with stainless steel supports for strength, stability and helping maintain tank temperature Stainless steel frame and feet Spring counterbalanced chamber with replaceable polyethylene guides Wash and Rinse Arms Stainless steel, revolving, interchangeable upper and lower anti-clogging wash arms with patent pending design Stainless steel, revolving, interchangeable upper and lower rinse arms with clean outs on both ends Pump Pump housing and impeller to be constructed of cast stainless steel to resist harsh chemicals and water conditions Self draining design with a flow rate capability of 160 gallons per minute Wash Motor Built for Hobart, 2 H.P. motor Motor to have Inherent thermal protection and reset Rinse Motor 1/15 H.P. motor