Specifications include, but are not limited to: A two (2) span bridge. There will be a 70 foot and 30 foot pre-cast bridge, barrier rails, and crane with operator. The bridge location is on Jefferson Davis Road, over Beaverdam Creek, Laurens County, SC. a. 2 Each – 70 Ft. Pre-stressed Exterior Slabs b. 10 Each –70 Ft. Pre-stressed Interior Slabs c. 2 Each – 30 Ft. Pre-stressed Exterior Slabs d. 10 Each – 30 Ft. Pre-stressed Interior Slabs e. Bridges and components must include all hardware, connection rods, plates, nuts, rubber bearing pads, joint backer rod, and self-leveling joint sealant for joints and dowel rod holes. f. Bridge and components must be built in accordance with SCDOT Standard Drawings for Bridges {See Attachment B- 30 ft and 70 ft span drawings} g. Contractor shall use item(s) from the SCDOT Qualified Products List 11 - Cold Applied Sealants for Bridge Joints to be provided to fill dowel holes on expansion end.