Specifications include, but are not limited to: Machine Construction: Bed, Cross rails, Ram Saddle, Spindle head, table, ATC must all be made of high tensile strength alloy cast iron. Machine must be fully enclosed and have safety interlocks system. Floor Space Max= L, W, H is 90” x 107” X 110”. Ball screw mounting and preloaded with twin ball screw mounts. Table size: X Travel 35-41” inches Y Travel 18-22” inches Z Travel 18” minimum Table equipped with T-slots X&Y Rapid Feed 1000 IPM Minimum Z Axis Rapid Feed 1000 IPM Minimum Spindle: CAT 40 Big Plus RPM = Minimum of 12,000 rpm’s AC Spindle Motor Horsepower 25Hp Minimum Spindle Torque at Low RPM is a minimum of (86Ft-lbs) Oil Jacket Spindle Chiller for motor and bearing Liquid cooled motors/ spindle bearing with oil, air and, mist Through Spindle Cooling System Coolant System: Machine must be Equipped with coolant tank and oil skimmer; Tanks must be removable on roll away. Machine must have flood coolant and through the nose coolant system. Motion and Way System: Equipped with Linear Roller Guides, Servo motors mounted directly to Ball Screws. Ways must be self-lubricated. Positioning Accuracy on XYZ axis must be with in .0002 and repeatability of .0002