Specifications include, but are not limited to: Provide all necessary labor, materials and equipment to haul via railway from the water, the R/V Lady Lisa, a cypress planked, wooden hull, St. Augustine Trawler, 75' x 20.5' x 9.1', of approximately 100 tons. 2. Pressure wash hull so as to remove barnacles, slime and any bottom fouling to allow for proper hull inspection, repairs and painting. Inspect entire hull. Inspect all fiberglass, worm shoe, garboard and entire keel for damage. Report any damage to DNR-MRD Representative for determination of action to be taken. 3. Captain will Inspect Zinc plates. Sizes of zincs are: 3" x 12" (Z5S-12) weld-on, 3" x 5" screw-on, 6" x 12" (ZHS-23) weld-on, and 4" shaft collar zincs. All zinc plates are to be supplied by the vendor. Refer to Captain’s direction as to replacing Zincs. All work on Zincs will be treated as “additional work” not to be bid on at this time. 4. Remove propeller after inspection by vessel Captain to allow for replacement of propeller. New Propeller shall be provided by SCDNR. Remounting and securing of propeller is to be included in the bid price that is submitted for this solicitation. 5. Remove the Three (3) transducers from hull of vessel, replacing ONE with a new transducer.