Specifications include, but are not limited to: - Provide demolition, materials and construction for bathroom remodel - Provide and install accessible shower system - Provide and install bathroom vanity and fixtures - Provide and install grab bars - Provide all necessary plumbing and electrical work to be completed by licensed contractor(s) Modification to Bathroom: 1. Contractor to remove existing shower, vanity, flooring, existing commode (save to reinstall in new location), existing door, and trim/remove all interior walls (plumbing wall, closet wall & shelving). 2. Remove and block off all plumbing which will not be used in this modification 3. Flooring in bathroom covered by laminate flooring. Matching flooring may be needed to complete modification. 4. Home is on a crawl space. 5. New spacing/plumbing wall will need to be constructed to fit shower system. Any area where new wall covering is needed must utilize moisture-resistant (green) drywall. 6. New plumbing and drain locations for commode, vanity and shower are needed. 7. GFI and switch locations are to be changed (see drawings). Switch operation to remain similar to existing 8. Any vanity light fixture to be re-used and moved to new location. Ceiling light fixtures and exhaust fan to remain in place. 9. Provide and install new 32” X 80” bathroom door, swing direction shown on drawing. Reinstall hardware from existing door. Style to match existing. Trim and paint to match existing. 10. Provide and install new bathroom vanity with under-sink cabinet. - Location similar to drawing, with final location to be determined on-site - Dimensions to be approx. 30”(w) X 22”(d) - Style/color to be similar to existing. - Reinstall existing wall mirror in new vanity location - New fixture to be American Standard, Kohler, Delta or Moen single ball-valve, operable by closed fist - Color to match exiting fixture 11. Provide and install new accessible shower system - Product to be Best Bath Systems Multi-Piece Curbed 60″ x 36″ x 81 1/2″ Shower, Model 5LES6036 - Include K-PAC Delta accessory kit PRODUCT CODE: KPACKR60XXD - Install according to manufacturer’s specifications - This is an ordered item with approx. 2-week lead time - Contractor will provide any licensed plumbing work and get inspections required to install shower to local & state codes (see the General Specifications section) - Location similar to drawing, with final location to be determined on site - Similar bath system may be considered, however prior approval of engineer necessary prior to official quote. Any substitute after official quote will not be permitted.