Specifications include, but are not limited to: 1. The Cab & Chassis shall be equipped with: a) Spring suspension on both axles b) A/C / Heat c) Power steering d) Air brakes e) Automatic transmission f) All tires shall be same size and have dual tires on each side of the rear axle 2. The design of the unit shall incorporate the latest available technology and engineering capacities. 3. The unit shall be new of current manufacture. No prototype, demo, or used will be accepted ; Truck must have 230”-260” wheelbase, with C/A of 186” (no exceptions) 80,000-psi yield frame minimum with necessary cross members for 20’ dump body Truck to have clean frame rails from back of cab to end of frame Truck to have standard front bumper (full width) Two frame mounted tow hooks; Engine shall be an electronic inline 6-cylinder diesel, turbo-charged with a minimum of 240hp/660lb/ft @ 1300 rpm of the manufacturers latest models and designs. Cummins engine preferred. ; Cooling System compatible for hot weather climate Engine’s antifreeze shall be Zerex G-05 or equivalent Engine to have electronic control, programmable upgrades.