Specifications include, but are not limited to: The project shall consist of the repair/resurfacing of the entire existing rubber system track, High jump, and Runway areas indicated on attachment A1 including the repair all cracks with prior to resurfacing. - Clean and prepare existing track by air sweeper or power washing. - Removal of all loose or delaminated areas. - Locate and fill all cracks. - Locate and patch all worn areas. - Prepare subsurface as necessary - Identify any drainage issues and make recommendations - Apply primer coat. - Apply install two coats of Red Polyurethane Structural Spray at a total rate of 3.6 lbs. per square yard to existing track surface area. Coating consists of .5- 2mm EPDM rubber granules and red pigmented polyurethane. - Layout, painted lane lines, and event markings per State of R.I and ASBA standards. - Provide a color-coded schedule of markings and provide a certification that the track is in accordance with specifications per the State of R.I and ASBA standards.