Specifications include, but are not limited to: A. Comprehensive Water Tank Interior Inspection – The entire tank interior shall be inspected, including but not limited to tank floor, walls, all piping and appurtenances, condition of all interior coatings, and sediment accumulations. All inspection items shall be documented in an inspection report. The report shall include photographs of all relevant items inspected. Digital video documentation shall also be provided (in a format to be approved by the Town). Photographs and video documentation shall be prepared and reported in accordance with typical water tank inspection documentation protocols. Inspections procedures shall utilize techniques that minimize disturbance of sediments. B. Water Tank Interior Cleaning – All tank interiors shall be cleaned and shall include but not limited to tank floor and all horizontal surfaces including ledges and all other interior tank appurtenances and areas exhibiting sediment accumulation. The Town will specify sediment discharge area within 400 feet of each storage tank. The Contractor shall provide flexible discharge hose of sufficient length to reach the specified discharge location. Cleaning shall employ techniques that minimize disturbance of sediments prior to their removal. C. Comprehensive Water Tank Exterior Inspection – The entire tank exterior shall be inspected including but not limited to condition of pedestal, platforms, walls, coatings, foundation, anchor bolts, manways, ladders, safety cages, fall protection, overflow piping, roof, vent, and hatches.