Specifications include, but are not limited to: The scope of work consists of the installation of all materials to be furnished under this Section, and without limiting the generality thereof, consists of furnishing all labor, materials, equipment, plant, transportation, rigging, staging, scaffolding, appurtenances and services necessary and/or incidental to properly complete all electrical work as shown on the Drawings, as described in the Specifications, or as reasonably inferred from either, in the opinion of the Architect as being required. 1. Grounding. 2. Sleeves, Inserts and Openings. 3. Pullboxes, Junction Boxes and Wireways. 4. Panelboards. 5. Dry-type Transformers. 6. Conduit. 7. Wire and Cable. 8. Electrical Supporting Devices. 9. Outlet Boxes and Accessories. 10. Wiring Devices and Plates. 11. Surge Protection Devices (SPD’S) 12. Nameplates. 13. Access Panels.