Specifications include, but are not limited to: 1. OPERATOR WORKSTATIONS AND ASSOCIATED DEVICES a. Visually inspect and clean all hardware of dust and debris b. Run virus protection c. Run diagnostic program to check pc operation d. Verify printer interface 2. NETWORK FIELD PANELS a. Visually inspect LEDs, fuses, cables, and connectors. b. Check and Verify proper power levels c. Clean and tighten all electrical termination points d. Verify intake filter clean and replace as required 3. Unit controllers a. Check sequence of mechanical equipment operation to insure optimum system efficiency b. Check outdoor, duct, immersion and space temperature sensor accuracy’s c. Check duct static pressure transmitter accuracy d. Verify current switch status feedback