Specifications include, but are not limited to: 1. Bidder proposes to furnish all labor, materials and equipment and services as required to complete the Work of this Bid Package, all in accordance with the Drawings and Specifications issued for this Proposal and the requirements listed within this Request for Proposals. 2. Screen approximately 3,500 cubic yards of on-site, stockpiled loam for the work of this bid package. This quantity will need to be supplemented by additional imported loam. Remove tailings resulting from this screening operation from the project site and legally dispose as part of the work of this bid package. 3. In addition to the quantity of loam generated by the screening operation above, identify the estimated quantity of additional loam required to complete the scope of this bid package. Include the cost of the additional loam in your base bid pricing proposal. Break-out the cost of the additional loam as a potential deduct Alternate on the attached bid proposal form, listing the total quantity of loam in cubic yards and the unit cost per cubic yard of loam. 4. The bioretention basins will be shaped to subgrade by others. This bidder will be responsible for providing and installing the filter fabric, bioretention soil and seeding the basins. 5. Provide watering and maintenance of newly seeded areas, per the Specifications, until final acceptance. 6. Exclude aerating, fertilizing and overseeding existing grassed areas that are beyond the project’s limits of work lines. 7. Where required to perform the work of this bid package, temporarily move / re-align the existing construction fence.