Specifications include, but are not limited to: 3.1 Contractor shall protect all furnishings, fixtures, equipment, and flooring during all work. 3.2 Pre-Inspection – Thoroughly inspect the condition of the floor and note any pre-existing stains or damaged areas that might require tile replacement or repair. 3.3 Brushing the grout lines – using a beveled brush, cut into the grout lines, in corners and around edges to loosen soil, grease, or dirt before the cleaning process begins. 3.4 High pressure rinse and extraction – Apply the proper cleaning solutions to the tile and grout, and complete a high pressure steam cleaning of the floor. 3.5 Apply Sealer – Apply proper sealer to the grout lines, corners, and along edged by sprayer, brush, or sponge.