Specifications include, but are not limited to: Steep Sloped Roof Replacement – Roof Areas #1, #2, #3. a. Contractor shall remove and properly dispose of the existing standing seam metal panel roof system and all trim down to the existing wood deck. b. Contractor shall inspect the existing wood deck. Contractor shall remove and replace any damaged or deteriorated decking. Rigid insulation is in place underneath the wood deck. Contractor shall inspect the insulation underneath any portion of wood that is removed. The contractor shall remove and replace any wet insulation found underneath the wood deck. The contractor shall furnish and install all materials related to the deck repair. c. Contractor shall furnish and install the new specified underlayment. d. Contractor shall furnish and install the new specified standing seam metal roof system. e. Contractor shall furnish and install all roof system accessories including but not limited to all flashing, gutter, gutter expansion joints, gutter outlet tubes, downspouts trim, penetration flashings, closures and snow guard components. f. Contractor shall have lightening rod system certified to UL requirements for entire facility. g. Contractor shall supply a thirty (30) year manufacturers finish warranty, a twenty (20) year Platinum Plus (or equal) manufacturers weathertightness warranty and supply a five (5) year contractor warranty all from the date of substantial completion.