Specifications include, but are not limited to: Fire Extinguishers (FE): Type: OSHA Approved, red, UL rated for type A, B, and C fires Size: 5 lb capacity. Fill and service extinguishers prior to substantial completion of project. Install in cabinet specified below where shown on Drawings. Adjust fire extinguisher locations when directed by local Fire Department. Fire Extinguisher Cabinets (FEC): Type: Surface mount, aluminum, trimmed. Door: Clear acrylic plastic convex bubble. Cylinder Lock: Not required. Brackets: Provide with manufacturer's standard brackets to support extinguisher. Manufacturer and Type: J.L.Industries Clear VU accepted substitute. Provide clean-outs where required by code, flush with finish flooring. Relocate plumbing fixtures as shown on Drawings, compliant with ADA mounting heights. Provide as-built drawings at completion of work. Calculate air flow for new room, size supplies to meet air flow requirements and rebalance system for proper air flow. Provide heating and air conditioning. Provide as-built drawings at completion of work. Demolition of existing light fixtures, branch wiring, and other devices as shown on Drawings. Provide new power and low voltage cabling and terminations where indicated on Drawings and as required by code. Terminate all cables to rack. Provide drawings and submittals for Architect review. Provide as-built drawings at completion of work.