Specifications include, but are not limited to: Provide ongoing janitorial services at OED’s Lincoln City Worksource Office. Contractor shall provide Services at 4157 NW Highway 101 Suite 250, Lincoln City, Oregon which consists of approximately 4,500 square feet. (1) CLEAN ENTRY GLASS. Clean and polish all lobby entry door glass and vestibule glass inside and out. (2) REMOVE TRASH AND DEBRIS. Empty all trash receptacles, interior and exterior, and return to their original locations. Empty trash receptacles into the appropriate trash container in such a manner as to prevent the adjacent area from becoming littered by trash. Replace liners. (3) CLEAN AND SANITIZE TABLES, COUNTERS, FLOORS AND SINKS IN BREAK ROOMS AND BREAK STATIONS. Clean tables, counters tops and cabinet surfaces, as well as all non-upholstery chair surfaces located in the employee break rooms, break stations and customer resource areas. Things found on top of these items, such as newspapers, magazines, etc., will only be moved to Clean and dry the surface, and then replaced to give an organized and neat appearance. Litter found on top of these items will be put in the trash. After cleaning, cleaned areas will be dry and have a uniform appearance with complete removal of soil from the surface, free from streaks, smudges, dirt, nonpermanent stains, litter, etc. (4) CLEAN RESTROOM SURFACES. Clean and disinfect doors, restroom walls, entry doors, plumbing fixtures, dispensers, shelves, countertops and trash receptacles. Remove any non-permanent stains, spots, streaks and dirt. After cleaning, surfaces will have a uniform appearance free from dust, lint, streaks, stains, and non-permanent markings. (5) CLEAN RESTROOM SINKS AND MIRRORS. Completely Clean and disinfect all exposed surfaces of the bathroom sinks and clean the exposed hardware. Clean mirrors and mirror frames. After cleaning, fixtures will present a clean and bright appearance and be free of visible soil, streaks, smudges, residue cleaning agents, spots, stains, etc. Mirror surfaces will be polished dry so that no visible signs of streaks, smudges, lint, film, etc. are present, leaving a uniform, clean appearance.