Specifications include, but are not limited to: 1.1.1 Contractor will provide necessary personnel and equipment to prepare, furnish and install Micro-Surfacing in accordance with the 2009 Oklahoma Department of Transportation Standard Specifications for Highway Construction, Section 404 Thin Surface Courses, MicroSurface. 1.1.2 Contractor will lay a single micro layer placed at a rate of 24#/SY(Composite) 1.1.3 Contractor will be responsible for any traffic control needed to complete the project. 1.1.4 Contractor will be responsible for any clean up following completion of project. 1.1.5 Contractor will be responsible for any damage done to adjacent property owners during construction. 1.1.6 The City of Ada will provide a sweeper, with operator to clean streets prior to Micro Surface application. 1.1.7 Micro-Surface, shall be paid for at the contract unit price by the number of square yards of micro surface, completed and accepted, and measured complete in place. The width for measurement will be the width from outside to outside of the completed pavement, but not to exceed the width as shown on the Plans or as directed by the City. The length will be the actual length measured along the riding surface on the centerline of the road, and shall exclude the length occupied by bridges, approach slabs, and all other exceptions. 1.1.8 Contractor must provide one (1) week notice prior to starting project and a mutually agreed upon schedule