Specifications include, but are not limited to: 1. CHLORINE (LIQUID) One ton and one hundred fifty pound cylinders Purity not less than 99.5% pure by volume. Standard specifications AWWA B 301-92 2. SODIUM SILICOFLUORIDE 50-pound bags The material required is white, granular, crystalline of at least ninety eight percent (98%) purity and suitable for potable water use. Bagged shipments shall be delivered on pallets. Bags must be off loaded onto single bag elevator by delivery driver (bag by bag). Standard specifications AWWA B 702-89. 3. SODIUM HYDROXIDE (CAUSTIC SODA) 12.5 Ton per dry ton FOB 15 Gallon drum The material required is fifty percent (50%) solution. Standard specifications AWWA B 501-88. BULK: Approximately 44,000 pounds per load in liquid form. BID PER DRY TON FOB REQUESTING LOCATION 4. CHLORINE (SODIUM HYPOCHLORITE) Tote bulk delivery to 100-gallon tanks located at well sites The material required is liquid bleach solution. The concentration to be 10% available chlorine by weight. Standard specification AWWA B 300-92. 5. POLYMER-Water Plant Bulk tank delivery. Shall be NSF approved for potable water and approved by Oklahoma DEQ for this use. Polymer shall be tested in the Del City Water Treatment Plant, on our raw water. Supplier shall provide at their expense not less than two drum for trial. Successful bidder shall run quarterly jar tests on polymer. Bidder shall submit specific gravity and material safety data sheet (MSDS) for each product herein bid. If product does not provide 0.12 NTU turbidity at 6.5 ppm during normal raw water turbidity conditions, the City has the right to void contract and re-bid or re-award.