Specifications include, but are not limited to: Wooden Snow Fence Slats: Slats are to be made of No. 1 Aspen or Spruce measuring (3/8") three-eighths inches thick, one and one-half (1-1/2") inches wide and 48 inches long. Variation in width is not to exceed one sixteenth (1/16") inch nor one-quarter (1/4") inch in length. Thickness is to be a minimum of three-eighths (3/8") inches thick but not to exceed 9-sixteenths (9/16") inches. Both ends are to be cut square. The slats are to be painted with good quality red iron oxide stain or equivalent. Wire: Slats are woven with 5 double-strands of 12½ gauge galvanized wire. Post: The post for erecting the snow fencing are to be made of hot rolled rail steel and formed into a “T”. Dimensions of “T” post section, approximately 1 7/16” X 1 5/16” x 1/8” x 6’ (six feet) long. Weight of post section without anchor is 1.25 pounds per foot. Area of anchor plates 23 square inches. The post shall be painted green or galvanized. Fence Post Minimum of 12½ gauge galvanized wire ties or approved equivalent. Tie Wire: A minimum of 8 inches in length is required.