Specifications include, but are not limited to: Mechanically remove existing coating and properly dispose of waste in dumpster provided Vendor Shot blast all surfaces to be coated in accordance with CSP 3-4 (International Concrete Repair Institute) surface preparation standards Fill all cracks and construction joints >1/16” with ECO-Flex Base Coat. All cracks and construction joints to receive 4-inch ECO-FLT pressure sensitive tape Honor and fill all true expansion joints post application of the parking deck system with Tennant’s FLS Flexible Sealant Primer: Apply Eco –FLP at a spread rate of 300 square feet per gallon nominal Base Coat: Apply Eco-FLB at 32 mils wet film thickness in strict accordance with manufacturer’s application guidelines. After base coat has thickened but still open, broadcast to rejection with selected aggregate at a rate of approximately 30lbs per 100 square feet. Remove excess aggregate after coating has dried. Finish Coat(s): Apply first finish coat of Eco-FLA at a spread rate of 80 square feet per gallon. After first finish coast has dried, apply additional coat of Eco-FLA at a spread rate of 125 square feet per gallon. Total system thickness = 1/8 inch. Apply stripes to match current layout and drawings.