Specifications include, but are not limited to: a.The PM should include at minimum, but not be limited to: oil, oil filter and fuel filter change. b.Functional system test inspection, including a full load transfer. c.Basic Oil Testing Kit with Lab analysis including PPM Spectro analysis and 21 element analysis. d.Basic Antifreeze Testing Kit with Lab analysis to include Boiling Point, Freezing Point, Reserve Alkalinity, Specific Gravity and PH Range. e.Check the condition and accuracy of all gauges. Submit findings in report. f.Visually inspect the control panel: Check for loose, broken or damaged wiring or components. g.Perform Walk-Around Inspection: Inspect engine, radiator, and generator assemblies for debris, loose or broken fittings, hoses or wires and guards, repair as needed.