Specifications include, but are not limited to: Horse ID tag, 2 pt. carbonless, print one side, green ink with black barcode, 3 rows of barcode labels on wax carrier at the bottom that are 4 across 1-5/8” x 3/4”, die cut, match sample. Pt. 1 = 8-1/2” X 8-1/4” including ½” stub Pt. 2 = 8-1/2” X 11” including ½” stub ; A. SIZE: 8-1/2” X 11” including ½” stub PT-1 = 8-1/2” X 8-1/4” including ½” stub & PT-2 = 8-1/2” x 11” including ½” stub B. STOCK: Carbonless white stock, Part 1, 15# CB and Part 2 20# CF, die cut label stock attached with strip of glue at top and bottom of label section. See sample. Label stock is made with permanent adhesive. C. PRESSWORK: 2 part carbonless for upper portion of this form with green ink and consecutive numbers crash imprinted in red, starting at 881003, ending 901003. No duplicates or missing numbers. Numbers will also be printed below barcode labels at the bottom of the form. Perforation is located 2-3/4” from bottom of the stub, on part 2. D. INK: Black & Green (match sample) (numbering crash imprinted in Red on top copy) E. BINDERY: ½” top stub, glue label stock to part 2, perf at the top of the label strip. Match sample F. FINISHED TRIM SIZE: 8-1/2” X 11” with ½” stub