Specifications include, but are not limited to: This airport runway broom will be primarily used in the sweeping and cleaning of snow slush and ice from airport runway, taxiway, and ramp areas. The broom must be manufactured expressly for airport pavement sweeping. All items of design and equipment not listed in these specifications, but involved in carrying out their intent, are required to be furnished the same as if these items were specifically mentioned and described in these specifications. Components shall be new, unused, of current production to the satisfaction of the purchaser. They shall be free of all defects and imperfections that could affect the serviceability of the finished product. Components should be readily accessible for repair and replacement, with minimal removal or disturbance to adjacent parts or components. Designs must use components within their rated values. Parts which are exposed to wear shall be capable of being replaced. Regular maintenance and servicing should be readily accomplished under normal working conditions. All broom components shall be designed to provide continuous service under difficult working conditions in -20 degrees F to +100 degrees F weather conditions or as specified without degradation of performance. The broom shall be designed to allow bristles to be easily replaced once worn or damaged. When mounted on a carrier vehicle, no components of the broom shall interfere with the servicing and maintenance of the carrier vehicle. The broom shall have the ability to remove snow, ice, slush, sand and other debris at the rated speed, capacity, and conditions per the following: a) The broom must be able to move 3 inches of snow at 15 pounds per cubic foot at the rated vehicle speed and full swept path. And, b) The broom must be able to move 1 inch of snow at 40 pounds per cubic foot at the rated vehicle speed and full swept path. At a minimum, the broom must meet the following standards: • Broom configuration: Front Mount Dedicated • Required speed of operation (MPH): 30 MPH