Specifications include, but are not limited to: This proposal is to provide the City of Columbus, Division of Refuse Collection, with a Universal Term Contract (UTC) to purchase eight (8) cubic yard front loader refuse containers, as well as replacement parts for the containers being bid. All of the refuse containers will be serviced by front loader collection vehicles throughout the City, by City personnel and/or agent(s) of the City, for utilization in residential collections and by City agencies. 3.3.1 Item# 1 Design Requirements - 8 Cubic Yard Front Loader Refuse Container: The container is an eight (8) cubic yard front loader refuse container, and any container bid shall conform fully to the specifications of this bid. 3.3.1.1 Capacity: All refuse containers shall be eight (8) cubic yards, plus or minus 0.2 cubic yards (+/- 0.2 c.y.). 3.3.1.2 Width: All refuse containers shall be seventy-two (72”) inches in width, suitable for emptying by front loading container trucks. 3.3.1.3 Depth: All refuse containers shall have a depth of six-foot eight -inches (6’-8”). 3.3.1.4 Design of Container: The container shall be slanted upward from the front opening of the container. 3.3.1.5 Height - Front Opening of Container: The front opening of container shall not exceed forty-eight (48”) inches from the floor. 3.3.1.6 Height - Rear of Container: The height at the rear of the container shall be six-foot one-inch (6’-1”). 3.3.2 Steel Body Construction: The walls of the container shall be constructed of a minimum of twelve (12) gauge steel. 3.3.2.1 Sleeves or Collection Pockets: The sleeves or collection pockets shall be constructed of three-sixteenths (3/16") seven (7) gauge steel or thicker, and must be reinforced with gussets of a minimum of ten (10) gauge steel.