Specifications include, but are not limited to: 5.1 Asphalt mixtures may be produced using the warm mix asphalt method according to 402.09 except as restricted by specification. 5.2 Vendor Notes: This will allow the vendor to provide product specific information on any item(s) bid on the material pricing tab. Vendor will not use this section to include additional conditions to any of the materials being supplied. 5.3 Milling / Planing / Grinding Shall be in accordance with current Construction and Material Specifications. Refer to the following Item #’s and Supplemental Specifications. • Pavement planing or cold milling (refer to Item # 254) • Pavement diamond grinding (refer to Item # 257) • Pavement micro-planing, Class B (refer to Supplemental Specification 897) o Equipment, Planing, Surface Patching, Surface Tolerances also under SS 897 Grindings (from Item #254 & 257) will be removed by the District unless otherwise agreed upon. The vendor will be responsible for collecting all waste material from the work performed and properly disposing of the materials.