Specifications include, but are not limited to: Recording of camera images should only occur when there is movement or a change of pixels in the viewing area. The camera(s) viewing angles are currently set. The awarded contractor may be required to adjust the viewing angle at the NDDOT’s request. NDDOT must approve the viewing area of each camera. a. Motion sensors are limited to the camera sensing motion to record. b. Detection intrusion must include door contacts for doors leading into the secure environment behind the glass of the operation. In most cases this involves only one door – see drawings. c. Glass break detection must be included in counter glass and all windows that are part of the secure space – see site drawings. d. A panic button should be part of the alarm system and located at the control panel. 7. Camera must be accessible via the internet by NDDOT staff whenever necessary. ; The CCTV Camera shall be a minimum 1/3” color high resolution vandal resistant dome camera with a varifocal 4.0mm to 9.0mm auto iris lens. d. The CCTV Camera shall be a minimum 1/3-type color CCD pick-up element with 768 (H) x 494 (V) pixels. e. The CCTV Camera shall have a minimum 550 lines of Horizontal Resolution. f. The CCTV Camera shall have a minimum of 48dB signal-to-noise ratio. g. The CCTV Camera shall have a Video Output of 1 Vp-p 75 ohm BNC connector. h. The CCTV Camera will be complete with dome, lens, and mounting brackets. i. The CCTV Camera shall be dual voltage DC 12v / AC 24v.