Specifications include, but are not limited to: 4,500 lb. research drill with active hydraulic down pressure and GPS auto trip. 3 Point sprayer with 60’ boom and hydraulic pump. John Deere 10’ 1590 drill with active hydraulic down pressure. Trade in tractor – 2000 New Holland TN55 2WD open station with 1481 hours. Serial # 001201933. To view trade or for pictures, contact Michael Wells at 701-567-4323. Tractor Specifications. 90 Engine horsepower, MFWD, cab, RTK auto steer. Cab with mechanical cab suspension, heat, AC, air suspension seat, radio, rear windshield wiper, ISO sockets, 12V multi power outlet strip, training seat. Controls for transmission, throttle, 3 point, SCV valves, MFWD and display controls on seat right armrest. Telescopic mirrors, LH & RH. LED work and road lights, beacon light. 16F/16R power shift or electrohydraulic shift transmission with left hand power reverser, ability to shift through all gears without using foot clutch. Closed Center, pressure and flow compensated (PFC) hydraulic system, with 3 proportional electrohydraulic SCV remotes and equipped with power beyond couplers, flow rate 25 GPM minimum. Less mid SCV’s. Variable ratio power steering. 540/540E/1000 rpm independent PTO. High capacity category 2 three-point hitch with 7,000 lb. lift capacity 24” behind lift point, telescoping draft links with ball ends, adjustable center link with ball end. 200 amp alternator. Cold weather package including 110V block heater. Toolbox. Front weight bracket with “suitcase” style weights totaling 1,000 lbs. Adjustable tread width (centerline to centerline) 58” – 74”.