Specifications include, but are not limited to: Demolition and removal of existing 30‐HP Square D 460v 60amp variable frequency drives for Cooling Tower fans 1, 2,3 and 4•Provision and installation of new 30‐HP variable frequency drives that are compatible with Schneider SmartStruxure BMS controls for Cooling Tower fans 1, 2,3 and 4 in 316 stainless steel enclosures 60”Tallx36”wide x 16”deep mounted to the same location with correct ventilation and using liquid tight flex line and load feeders•Demolition and removal of existing power 30amp distribution/basin heater control panel enclosures for Cooling Tower fans 1, 2,3 and 4 that are compatible with Schneider SmartStruxure BMS controls•Provision and installation of power distribution/basin heater control stainless steel panel enclosures for Cooling Tower fans 1, 2,3 and 4 to be mounted in the same location as the existing with correct ventilation and using liquid tight flex line and load feeders•Provide start up, and check out the VFD’s for proper operation falls between operating parameters