Specifications include, but are not limited to: 1. Shop Floor Footprint: 72”W x 72”D Max. 2. Must provide full CNC control in X and Z axes. 3. Swing over Bed: 15” Dia. Min. 4. Carriage Travel: 10” x 10” min 5. Must be capable of machining aluminum, titanium and steel with precision/repeatability to .001”. 6. Must include integrated oiler (ways, etc.). This can be either manual or automatic. 7. Power Source: Single Phase, 200-250VAC, 60Hz, 20 Amps Max. 8. Spindle Power: 3HP 9. Max spindle RPM capability: 3000 min. 10. Work Holding (spindle): Direct Mount (D-1) and 5C taper. 11. Must include 3-jaw direct-mount (D-1) chuck (6” dia minimum). 12. Tool Holding: Standard quick change 4-position tool post with any required mounting hardware. 13. Feed Rate: 60 IPM minimum (X and Y axes). 14. Must include integrated CNC controller capable of both RS-274 G&M code control and conversational programming. 15. CNC Control must allow rigid tapping, threading, and constant surface speed functions. 16. User interface with controller must, at a minimum, include monitor and keyboard (or keypad) and jog/shuttle controller with all required cables. It is permissible for these features to be integrated into one unit (ex. Touch screen capable LCD).