Specifications include, but are not limited to: The resultant Contracts shall be for Class 3 through 8 Vehicles (i.e., Class 3 (10,001 to 14,000 lbs GVWR.), Class 4 (14,001 to 16,000 lbs. GVWR), Class 5 (16,001 to 19,500 lbs. GVWR), Class 6 (19,501 to 26,000 lbs. GVWR), Class 7 (26,001 to 33,000 lbs. GVWR), and Class 8 (33,001 lbs. GVWR & Over). “Class” shall refer to a Vehicle classification, as designated by the U.S. Department of Transportation, which is determined based on the Chassis or Complete Vehicle’s GVWR. “Vehicles” includes the following: A. Chassis (Class 3-8). “Chassis” shall mean the portion of a Vehicle that includes the frame, wheels, and machinery (e.g., engine, transmission, driveshaft, differential, and suspension), and is an incomplete Vehicle that requires the addition of a Body to perform its intended functions. Chassis includes Chassis cabs, Cutaway Chassis, and any other Chassis-only incomplete Vehicle. B. Bodies. “Bodies” shall refer to the portion of the Vehicle that carries the load or cargo, and may be attached to a Chassis. (e.g., aerial lift, ambulance, beverage, box/van, bus, concrete mixer, dump, flat bed, log, pickup, recyclable/refuse, refrigerator, service/utility, stake, sweeper, tank, tow truck, trailer), and is an incomplete Vehicle that requires the addition of a Chassis to perform its intended functions