Specifications include, but are not limited to: 1. Material: a. Material requirements shall conform with the New York State Department of Transportation Standard Specifications (1/2/90) for plant mix pavements Sections 401 and 403. b. Shall be any or a combination of the following items; as determined by the Commissioner or his designee: 403.11 - Type 1 Base 403.13 - Type 3 Binder 403.17 - Type 6F Top 403.1901 - Type 7F Top 403.21 - Truing and Leveling Course 2. Project Performance Responsibilities: a. The “In Toto Price Bid per Unit” shall include the transportation of material(s) and equipment to the project site, and all necessary equipment, labor, and materials to complete the project to the satisfaction of the Commissioner or his designee. b. The Commissioner or his designee shall determine the type, grade, temperature, and quantity of material(s) to be applied on any and all projects. c. It shall be the contractor’s responsibility to assure by whatever means necessary that all surfaces to be paved are properly and sufficiently cleaned before beginning paving operations. d. Construction requirements shall conform with New York State Department of Transportation Standard Specifications Sub-Section 401-3 and shall conform with the instructions of the Commissioner or his designee. e. The contractor shall provide competent, trained personnel experienced in all aspects of the placement of hot mixed bituminous pavement. f. “Maintenance and Protection of Traffic” – i. The “Maintenance and Protection of Traffic” as per NYCRR Volume 1713 (Uniform Traffic Control Devices) including installation of short-term pavement marking per NYSDOT Standard Specification Section 619.-1.06 or as directed by the Commissioner or his designee shall be provided by the contractor. All costs associated with maintenance and protection of traffic shall be borne by the contractor.