Specifications include, but are not limited to: MVD-10141 REGISTRATION RENEWAL WITH STICKER Size: 8-1/2” wide x 11” tall. Paper: 28# White Laser MOCR or equivalent. Sticker/Tab: Fasson reflective validation material or equivalents in any color required by the state, having a smooth flat outer surface with integral (embedded) counterfeit proof markings. Sticker to be coated with Moore Wallace Secure-Coat or equivalent coating to become solvent resistant with regular toner. Sticker is to be 1-1/2” wide by 1-1/4” tall with .125" radius rounded corners. The sticker is to be located 4-3/4” from the top paper edge and 1-1/4” from the right edge of the paper. Sticker is to be 4 mil white, retro-reflective polymer film, CT per (solvent acrylic all-temp) on 50# SCK liner. Sticker material must display tamper evidence if attempts are made to remove toner by manually scraping or lifting the toner off of the sticker. Patch: Tipped on Patch Liner – Clear Poly clear 50# SCK, Permanent Adhesive, 2.00” x 1.75”. Perforations: Two horizontal micro perforations. One to be 3-11/16” from the top edge and the second to be 7-13/16” from the top edge MVD-10332 CAB CARDS WITH NESTED TAG AND WHITE STICKER MATERIAL Size: 8-1/2” wide x 11” tall. Paper: 28# White Laser MOCR or equivalent. Sticker/Tab: Fasson reflective validation material or equivalents in any color required by the state, having a smooth flat outer surface with integral (embedded) counterfeit proof markings. Sticker to be coated with Moore Wallace Secure-Coat or equivalent coating to become solvent resistant with regular toner. Sticker is to be 1-1/2” wide by 1-1/4” tall with .125" radius rounded corners. The sticker is to be located 4-3/4” from the top paper edge and 1-1/4” from the right edge of the paper. Sticker is to be 4 mil white, retro-reflective polymer film, CT per (solvent acrylic all-temp) on 50# SCK liner. Sticker material must display tamper evidence if attempts are made to remove toner by manually scraping or lifting the toner off of the sticker.